Copper Contact For Round Type Fuse Link

1-Products Name: Copper Contact for Round Type Fuse Link

2-Material: Red Copper Stamping Parts:99.99% Copper T2Y2(SECu/C1100) ,%IACS≥97,HV:80~110s;

3-Mechanical properties of T2 copper of Copper Outer Cap:

Density g/cm³: 8.9

delivery status:

(1)The copper plate which can be made Copper Slip Cap is in the (R) state, the thickness is 4-14mm, the tensile strength is Rm/Mpa (≥195) and the elongation after breaking is % (≥30); it is delivered in the shape of (M, Y1, Y2, Y, T), Thickness 0.3-10mm, tensile strength Rm/Mpa (≥205-350), elongation after break % (≥8-30), hardness HV: 60-120.

(2)Copper strip of Copper Slip Cap Fitting in (M, Y4, Y2, Y, T) state, thickness ≥0.2mm, tensile strength Rm/Mpa (≥195-350), elongation after break % (≥3-30), hardness HV: 60-120.

4-The application of red copper of Copper Outer Cap: 

Red Copper End Plate has excellent electrical conductivity, good thermal conductivity, good corrosion resistance and processing performance, and Copper End Caps Round can be welded and brazed. T2 copper of Copper End Cap Solder Fittings is mainly used as electrical, thermal and corrosion-resistant components.

WELDING TECHNOLOGIES
Brazing Copper Cap and Fuse Terminal Contact is to use a metal material with a lower melting point than the base metal as the solder, heat the weldment and the solder to a temperature higher than the melting point of the solder and lower than the melting temperature of the base metal Copper End Caps Round and Fuse Link Contact, and use the liquid solder to wet the base metal to fill the joint gap and A method for connecting weldments by interdiffusion with the base metal. The brazing deformation is small, the joint is smooth and beautiful, and it is suitable for precision welding. Before brazing Outer Cap and Automotive Fuse Terminals, the workpiece must be carefully processed and strictly cleaned to remove oil stains and excessively thick oxide film to ensure the interface assembly gap. The gap is generally required to be between 0.01 and 0.1 mm.

OUR CERTIFICATES

Step 1:Sealed in plastic bag.

Step 2:Packed in carton box.

Step 3:Pallet and wrap with moisture-proof film

The shipping time to main countries over the world ,such as US, EURO about 7-10 days by express.

Tagiau poblogaidd: Cyswllt copr ar gyfer cyswllt ffiws math crwn, llestri, gweithgynhyrchwyr, cyflenwyr, ffatri